I am trying to wrap up a project that has been ongoing for almost 3 years now. Everything is in and wired up. The only thing I have not touched is the interior wire harness.
Car in question is a 2001 Jetta wagon 2.0 5 speed.
I have a 24v VR6 out of a 2003 GLI
Currently the car will crank...
I didn't realize the car was made in 09/2005, so this would make it the 2005.5 instead of 2006 and the steering wheel button would be different. It only has the half sized square screen and not the full rectangular with menu.
I used the GLI airbag but I lost the horn and then had steering...
I have a 2012 Jetta SE, anybody know if there are options to replace the seats? The stock bolsters are causing major back pain! I really need a flatter seat w/ lumbar support.
I hear Jetta mkV seats bolt in and Audi S6 seats can work w/ some wiring needed.
Anybody have any experience w/ this?
about two months ago i destroyed my 04 1.8t's tiptronic transmission finally after 9 or so months and 10,000 miles on revo stage 2 and many mods. the transmission was not rebuildable as it had a fist sized hole in the case. now i am swapping the 5 speed out of an 02 tdi jetta. i...
All right so I have a MK4 Jetta and as we know its stock 5x100 , well the wheels I'm looking at are 4x100, there are no adapters that I can buy.
What exactly would need to be done to swap the whole assembly to a 4x100 set up?
I know this forum is for Jetta's but this has something to do with one. I have a 1997 5 speed Golf Trek edition. 4 Cylinder with a 2.0L engine. I need a new engine. This is probably a simple question but would a Jetta of the same year and same engine (2.0L:p) fit in the car? I would think so but...
i have a 96 2.0 that i am building i am swapping to the MK IV intake manifold for ease of turbo install it currently does not run but i have the parts to get it running ordered after i get it running i have putting the turbo on getting a head spacer to lower compression yes i have green top...
I recently picked up my 90' Jetta GL form my off road VW motor and transmission builder. He spent alot of time and effort in this car swapping the motor with a 98' 1.8 and a 5 speed Diesel Transmission. The springs are Neuspeed (Red) and Bilstein Shocks from a MK3 GTI. Supposedly they...
I have a 97 Jetta GLX that i used as a donor car for my 4 door golf vr swap.
I stayed four lug so the 5 lug conversion is still on this car.
Located in Myrtle Beach, SC.
Everything but engine, transmission, engine wiring harness, hood, headlights, and grille is in the car.
Rims in photo not...
so im looking to do an engine swap from a gas to a tdi engine, i know there are various tdi engines so i was wondering if anyone had any ideas as to which engine i should use. keep in mind i plan to build a performance engine ( pushing 250+ hp and 250+ f/lbs of torque) so im looking to know...
this is the original gears out of my 01 Jetta TDI. i just swapped em out for the .658 s[I]et. i love the gear swap too btw as im constantly at 75 mph. first 175 takes em and i'll ship em to you quick. Thanks!
We just recently bought a 2000 GLX with the following options
rain sensing wipers
I have a couple of questions
1) how do I program the seat memory, and can I program to my fobs?
2) anyone have a factory airbox they wish to swap for my...
The Full ABA Swap would include:
- Complete ABA Engine with 137k miles (Runs Perfect)
- 02J 5 Speed with 137K miles
- ABA ECU
- ABA Wiring Harness
- ABA Air Filter Box, Mass Air Flow Sensor, and piping.
- NEW Ignition Coil
- MK3 K-Frame
- ABA Radiator
- ABA Cooling Fan Assembly
- ABA Coolant...
so i was driving along a couple weeks ago and went to pull into a driveway, when i down shifted and let off of the clutch i heard "B A N G" and that was all she wrote. completely ate the main gear in the differential and punched a couple holes in the case. it wasn't pretty... half of a sheared...
hey, i'v got a 1985 golf gti 8V k-jetronic and a 1987 jetta gti 8v and i am planning to swap the engines over as the jetta is a betta car but the golf has a better engine in it and its running on kent cams. just wondering if anyone would have a clue as to how easy/hard its going to be to swap...