I have the same problem in my mk3 but my tach works...I. have changed both cluster and sensor and still having the problem....also when I hit bump it rattles some thing and the some ***** will work for a while.....also dislike the green lights..would like to update!
Diagnose help - Tach/spedo dead
If I missed it forgive me I did a little searching and couldn't find anything relative to my situation.
Both my tach and speedo on my mk3 are dead. I read up and found that usually it's the speed sensor, and luckily the previous owner had pulled one from another mk3 before having it go to the impound. Anyway, either the speed sensor I installed is not working still or there's some other issue (maybe with the cluster) since the tach doesn't work too.
The rest of the gauges work fine if I remember correctly (fuel and temp) and the odometer works fine as well.
If anybody could give me next steps to look at I would greatly appreciate it. Thanks!
Both my tach and speedo on my mk3 are dead. I read up and found that usually it's the speed sensor, and luckily the previous owner had pulled one from another mk3 before having it go to the impound. Anyway, either the speed sensor I installed is not working still or there's some other issue (maybe with the cluster) since the tach doesn't work too.
The rest of the gauges work fine if I remember correctly (fuel and temp) and the odometer works fine as well.
If anybody could give me next steps to look at I would greatly appreciate it. Thanks!
1 - 1 of 8 Posts
1 - 1 of 8 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Volkswagen Jetta Junkies
A forum community dedicated to Volkswagen Jetta owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Recommended Communities
