Volkswagen Jetta Junkies banner
1 - 2 of 27 Posts

· Registered
Joined
·
7,555 Posts
NGK's BKR7E's ftw. In a 1.8T chipped, gap to .028, stock gap to .032.

Its a colder plug than the stockers... They work very well, and are only about $2 a piece.

Expensive plugs are unncessary, and in some cases, decrease the performance of your engine!
 

· Registered
Joined
·
7,555 Posts
Should be able to get them at autozone/advanced... Atleast NAPA I would think, I forgot where I got mine.

They're wicked easy to install... Unplug your coil packs, pull em' out, and your spark plugs are right there. Torque to 22 ft/lbs or just guess it. Having them too loose is WAY better than too tight. Last thing you wanna do is break off a plug while the threads are still in the head of the engine.

Gap is VERY important, so if you don't have feeler gauges (autozone, $5) then buy some.
 
1 - 2 of 27 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top